Australia
- Six patent components ensure 100% waterproof
- Only three-step installation: placing, clamping, buckling
The BIPV roof mounting system has full waterproof performance and greatly improved the service life for standing seam roof sheet.has full waterproof performance and greatly improved the service life for standing seam roof sheet.
The BIPV roof solar racking solution enables the solar power generation system to better fit the roof surface. Compared with ordinary standing seam roof solar mount, it has full waterproof performance and greatly improved the service life. The configuration of the lateral board for overhaul facilitates system maintenance. At the same time, the laying of the light transmissive fake module effectively improves the roof light transmittance.
- Six patent components ensure 100% waterproof
- Only three-step installation: placing, clamping, buckling
-Lightweight, preventive and customized O&M
-All aluminum material ensure architectural aesthetics and high anti-corrosion strength
 |
 |
 |
 |
|
Roof clamp |
Rail & Rail splice |
water guiding beam |
Waterproof tape on panel side |
 |
 |
 |
 |
|
End clamp |
Mid clamp |
Fake module for light transmittance |
Board for walking |
Location: China
Capacity: 10MW
Rail-Free ballasted flat mounting system
The Rail-Free ballasted flat mounting system is our newly developed product for your choice, a south-oriented racking solution for mounting framed modules on flat roofs with 5°，10°mounting tilts.
Ramming pile ground mount
Designed and certificated according to Australian standards, this ground mounting solution is standardized to fit 18 solar panels with sizes up to 2300 x 1200mm. It also features flexible adjustments to allow achieving 20°, 25°, and 30° install angles, which helps users to optimise orientation and tilt to obtain maximum efficiency in energy collection from the sun.
TAI-Universal- Multiple Slew-Drive Single-Axis 2P Tracker
Adopt trio slew-gear motor drive mode which can limit girder distortion risk and ensure stable operation and accurate transmission.
Triangle flat roof mounting system
The Triangle flat roof mounting system , a robust aluminum construction , the footing options for both ballasted solution and roof penetration.
SnapFit C&I Mounting System
ANTAI SnapFit mounting system is typically designed for the commercial & Industrial solar roofs, providing not only a robust system that meets the AS/ NZS1170.2:2021 standard, but also a fast installation system to save up to 50% time than the traditional racks. Its innovative design is started from the interface, module clamps to the elevated tilt legs, just an easy snap-in step to finish the installation in a flash.
Adjustable tilt flat roof mounting system
The Adjustable tilt flat roof mounting system can be set at a tilt angle from 10° to 60°，which has great flexibility and can help to get the maximum solar power output.
Waterproof carport solar mounting system
The waterproof carport solar mounting system is one of the advanced version to provide fully waterproof solution for parking lot shade.
Non penetrating ballast mounting rack
The Non penetrating ballast mounting rack is a ideal solution for use on industrial buildings with low admission additional loads. The system is delivered in compact form to save cost.
