Australia
- Single slew-drive design
- Match for bifacial modules
- Match for auto-cleaning robots
Adopt slew-drive, enlarging tracking range. Comparing with fix structure, it’s accurate tracking and can achieve 10%-15% power generation augmented.
• PV string power supply with back up battery
• Wireless communication, less cable consumption
• All-weather shadow avoid strategy
- Single slew-drive design
- Match for bifacial modules
- Match for auto-cleaning robots
- Dampers on both sides, effectively protect the torque tube
-Fewer column for fast installation
- Wide tracking range
Capacity: 6.259MW
Location: Brazil
|
Electrical Specification |
System Specification |
||
|
Control Mode |
MCU |
Drive mode |
Slewing drive |
|
Tracking Accuracy |
2° |
Foundation Type |
Concrete/Pile Ramming Steel |
|
Protection Level |
IP65 |
Tracking range |
±60° |
|
Working Temperature |
-40℃~85℃ |
Module Layout |
One-in-Portrait (1P) |
|
Power Supply |
PV String Power Supply |
Ground Clearance |
0.3m |
|
Monitoring System |
SCADA (Optional) |
Working Wind Tolerance |
≤18m/s |
|
Communication |
Wireless/Wire Communication |
Max Wind Tolerance |
47m/s(ASCE7-05)
|
Rail-Free ballasted flat mounting system
The Rail-Free ballasted flat mounting system is our newly developed product for your choice, a south-oriented racking solution for mounting framed modules on flat roofs with 5°，10°mounting tilts.
Taiyang Roof all aluminum BIPV solution
The BIPV roof mounting system has full waterproof performance and greatly improved the service life for standing seam roof sheet.has full waterproof performance and greatly improved the service life for standing seam roof sheet.
Tile roof solar mounting system
The Tile roof solar mounting system is suitable for roofing with pantiles and corrugated fibre cement, with wide range of different roof hook for the best choice.
Metal roof mounting system
The Metal roof mounting system is suitable for roofing with corrugated sheet metal, trapezoidal metal sheet. L Feet , hanger bolt is available as foot option.
Adjustable tilt flat roof mounting system
The Adjustable tilt flat roof mounting system can be set at a tilt angle from 10° to 60°，which has great flexibility and can help to get the maximum solar power output.
Non penetrating ballast mounting rack
The Non penetrating ballast mounting rack is a ideal solution for use on industrial buildings with low admission additional loads. The system is delivered in compact form to save cost.
Steel carport solar mounting system
The Steel carport solar mounting system can achieve heating isolation and waterproof your car parking.
Steel ground mounting system
The Steel ground mounting system is the most economical ground mounting system for large scale solar plants.
